LED Bulbs for the Home – Enlightening!

Wal-Mart.com USA, LLC

With all the talk of saving money, saving energy, go green this or that, sometimes it can all get a bit overwhelming to a point that nothing gets done. However, one simple step can be taken to get started doing all of that – replace the bulbs in your home with LED bulbs. As you will see, it’s not as expensive as you may think…

What are LEDs?

LED is an acronym for Light Emitting Diode. Simply put, it is a semiconductor that puts out light. They use about one-third less energy than Compact Fluorescent Lamps (CFL’s), and only a fraction of the energy used for incandescent bulbs. They are perhaps the most versatile of all the lamp types – you can customize the color, the amount of light output, and even the beam direction. They radiate less heat than their CFL and incandescent companions, whose heat output makes up about 80% of their energy use!

LED bulbs can be purchased in styles that allow to swap out from incnandescents one for one. They put out just as good or better light than incandescents, and have a wider variety of light color – from very warm to ‘daylight’ colors, which will become more of a blue tint.

Cost Savings and Going Green

For anyone who has taken microeconomics in college, the term ‘scarcity’ has rung through the lessons. We are running on limited supplies of everything. Granted, these supplies are still in great abundance, but it doesn’t mean that we can’t look for better ways to conserve what we do have. One good way to do this is to replace the bulbs in your home with LED’s.

Energy Savings

Let’s take a typical 60 watt light bulb. Even by today’s regulations, manufacturers are producing these as Halogens, and only use 43 watts. That’s about a 28% reduction off the bat, but they still produce more heat than they do light. Switching to a CFL, you will be paying for 13 watts of energy, and a bit less heat than with the incandescents. An equivalent LED bulb, on the other hand, will use only 7 watts of energy and output even less heat than the CFL’s. The heat savings alone can help reduce cooling costs, offering even more savings as a byproduct.

Cost Savings

Let’s talk bottom line here. According to the EIA (U.S. Energy Information Agency), the average cost for electricity in the United States is over $0.12 per kWh (kilowatt hour). With the average residential electricty use across the U.S. being close to 910kWh per month, that is an average bill can range any where from $81.35 in Louisiana to $202.29 in Massachusetts! Also according to the EIA, lighting use in the home averages close to 10% of the electrical bill each month. So, by doing the math, each home can save an average of $8.65 per month, or close to $104 per year!

It doesn’t seem like a lot, but consider this – an average incandescents costs about $1 and lasts about 1200 hours. A CFL will cost about $2, and last about 8000 hours. An LED on the other hand, can be purchased as low as $4 each and last 25,000 hours. Figure these costs together with the electricity use over the life of the LED’s, and you will be saving HUNDREDS of dollars per bulb!

Light bulb cost comparison chart

 

Choosing LED Bulbs

There are many different styles styles to choose from that make it easy to match your existing bulbs. LED’s also make it easy to customize the ambience of the room ranging from a very warm look great for living rooms and bathrooms, to very bright and cool that is better for vanity rooms and outdoors.

Type of Light Fixture

LED bulbs are made to fit in just about any type of fixture. No matter the fixture type – table lamp, ceiling fan, even outdoor lighting – whatever type bulb that you have, there is most likely an LED equivalent. You may find that you can achieve more light with LED’s, since they do not release as much heat as incandescents or CFL’s do.

Outdoor Post Light with Compact Fluorescent Lamps

Lamp (bulb) base type

There are many types of lamp bases (the end of the bulb that screws in to the socket). The most common one is the medium base, which is about 1″ in diameter. This is the one that you will find in almost every light fixture or table lamp. Medium base bulbs are the least expensive type.

Other base types include candellabra, one of the smallest, and is just shy of 1/2″ diameter, and is the type used in most chandoliers, wall sconces, and some ceiling fans. A less common base type is the Intermediate base, which measures in at less than 3/4″ diameter. If you don’t know which one your light fixture uses, simply unscrew the bulb (make sure it is off and cooled down before touching it!), and look at the screw part. The diameter of the screw will tell you the base type.

Wattage and Lumens (how bright you want it)

One of the beauties of LED’s is that, as stated earlier, they do not release near as much heat. If you look at a light fixture, you will most likely see a tag that states the maximum wattage bulbs to use. This is referring to incandescent bulbs, and because of the excessive heat they release when they are on. You can click here to learn more about rated bulbs and other electrical fire hazards. With all that said, with LED’s, you can actually use a bulb that outputs more lumens than the bulbs the fixture is normally rated for. As an example, say a fixture is rated for two 60 watt bulbs. That would be a total of about 1500 lumens, bright but not quite enough to light up some rooms. If you are using LED bulbs, than you could actually use the 100 watt equivalents that output approximately 1200 lumens each, nearly doubling the amount of light and only using up 25 watts of electricity between the two of them. That and virtually no heat!

Customize Your Lighting

If you feel the room needs to feel a little more relaxing and comfortable, go with a warmer color. If you need a lot of light to see all the little details, go with a cooler light. If you want to control how much light there is, use a dimmer. LED’s can be used to customize your room to whatever your needs may be.

Temperature Color

The lower number, the warmer the light. The higher, the more like ‘outdoors’. Example: I use warmer colors in my living room and bedroom, because it offers a calm, comfortable light that I can relax in. The color range that I look for is between 2700k through 3300k. The k stands for kelvin – the color ranges are actually scaled as temperature ranges.

Most people prefer a very good, bright light in the bath and vanity rooms so they can see the details from shaving, applying make up, etc. Cooler type light colors are best for this. Color ranges from 5000k through 7200k will do the trick.

Dimmable

LED light bulbs can be purchased as dimmable. These are a little more expensive, but not so much that you will not see the cost savings discussed above. In fact, by dimming the bulbs, you do use a small fraction less energy, that can actually add to the overall savings.

Start Saving Energy Today!

There is no doubt at all that converting to LED bulbs will save you hundreds, even thousands of dollars over the life of the LED’s. The ability to customize is always a plus in making your house or apartment a home. Not to mention the lower risk of fire hazards by using low wattage bulbs, there is no reason not to change to LED bulbs in your home.

Have any questions or would simply like to leave a comment? Please do so below!

 

 

 

 

8 Comments Posted

  1. It’s great that they come in a variety of sizes. Do you find that LED lights are as bright as Halogen bulbs? They do seem safer and more environmentally friendly.

    • That is normally going to be dependent on the manufacturer. If you look at the package, you will see the ‘Lumens’, which is the amount of light output. They are very comparable as to light output. LED’s do have a considerable lower carbon footprint, even when being produced.

  2. I have always been aware of the fact that LED lights could save you money but I didn’t really understand why. It is really cool to understand so deeply the importance and effectiveness of using these type of bulbs. I love how they come in different colors, that is great for room decor and outdoor use. The difference in savings between the four bulbs in amazing. Since all of the bulbs are equal in terms of lumen but the LEd bulb has a longer lifespan it wouldn’t make sense not to change. Thanks for this info!

    • Absolutely! Reducing waste is another plus as well since LED’s can last so long, think of how many of the “other” that get thrown away or sent to recycling during the life of a single LED. That in itself is significant 🙂

  3. That’s an awesome post!
    I have to admit – I’m horrible when choosing bulbs.
    Never seem to find the right or a good one.
    You’ve just changed that.
    Thank you so much for sharing your article.
    I’m sure it will be helpful to a lots of people who are lost about bulbs just like I am!

    • Happy to help! It would seem most people only worry about just going out and buying a new bulb just because one burned out. Just a little knowledge and effort can mean the world even for the mood of the home. Thanks!

  4. Awesome post Matt! Particularly love the energy cost savings that you highlighted. Usually I’m put off by the sticker price but it does make sense in the long run

    • Absolutely it does! I knew there were long term savings with LED’s, but until I actually researched the numbers to write this, I was blown away!

Leave a Reply

Your email address will not be published.


*